Machine features:
●Comprehensive cleaning system: Thorough and effective cleaning of organic and inorganic substances left on the product surface;
●Fully automatic cleaning mode: Complete cleaning, rinsing, and drying steps in one cleaning chamber, small volume, compact structure;
● Visualization of the whole process: The showering room is equipped with a visual window, and 2 LED lights are installed. The cleaning process is clear at a glance;
● Large cleaning capacity: 610mm(L)*560mm(W)*100mm(H) Double-layer design to meet larger product size and higher cleaning productivity;
● The most scientific nozzle design: The use of the left and right incremental distribution to improve cleaning efficiency; up and down dislocation distribution, completely solve the cleaning blind area.
●Adjustable nozzle pressure design: Reduces the risk of collision and splashing caused by high-pressure shower conditions during cleaning of small-sized products.
● Standard Diluent Tank Heating System: Greatly improves cleaning efficiency and shortens cleaning time
● Large-size touch screen operation interface: The stable and reliable color touch screen can be used to set different cleaning process parameters according to different products, and the operation is more simple.
● High standard of cleanliness: The degree of ion pollution is in full compliance with IPC-610D's Class III standard (less than 1.5ug/cm^2 to be accurate) and Class I standard of US military standard MIL28809.
● Convenient cleaning agent proportioning method: It can be manually added, or it can automatically match DI water and chemical liquid according to the set proportion (5%-25%).
●Spray room auxiliary heating system: Temperature compensation during cleaning and rinsing to maintain the liquid temperature and ensure lower cleaning and rinsing costs: Built-in filtration system enables the recycling of cleaning fluid, and an effective recovery method reduces liquid loss. Diluent concentration compensation system: During the operation of the equipment, the concentration of the diluent will gradually decrease, and the concentration compensation system ensures that the concentration of diluent is kept within the optimal range.
● Spray chamber structure: Spray chamber double seal design to ensure a good sealing effect

Technical Parameters:
Cleaning basket size: Single layer: 610mm(L)*560mm(W)*100mm(H) Double layer design
Dilution tank capacity: 70L
Spray tank capacity: 17L
Concentrate tank capacity: 30L
Cleaning method: 360° rotary cleaning
Cleaning time: 5-30 minutes (reference)
Rinsing time: 1-2 minutes (reference)
Number of rinsings: 1-99 times (settable for safety requirements)
Drying time: 20-30 minutes (reference)
Washer Recovery Filtration: 0.45μm (filtrate: solder paste, rosin, flux and contaminants)
Rinse Drain Filtration: 0.45μm (filtrate: solder paste, rosin, flux and contaminants)
Diluent heating temperature: Normal temperature ~ 55 °C
Spray tank temperature compensation: Room temperature ~55°C
Drying heating temperature: Room temperature ~ 80 °C
Resistivity meter monitoring range: 0 ~ 18M.
DI water supply: 30～60L/min
DI water pressure: ≦0.4Mpa
DI water inlet and outlet connecting pipe: 1 inch
Air supply: 0.45Mpa~ 0.7Mpa
Air consumption: 200-400L/Min
Power Supply: AC380V 50HZ 65A
Net weight of machine: 600Kg
Exhaust size: Φ100(W)×30mm(H)
Machine size: 1200mm(L)*1100mm(W)*1830mm(H)